This program updates the camera firmware to version 2.0 and enables the camera to work with SanDisk® Memory Stick PRO Duo™ media cards.

IMPORTANT: This firmware update is only for a DSC-H2 Cyber-shot camera that has a serial number that falls in the range from 3500001 through 3534250, and has Version 1.0 of the firmware installed.

The process for upgrading the firmware is to download the compressed firmware file to your computer (Mac OS 9.1, 9.2, or X 10.3) and then copy it over to Sony Memory Stick Duo™ media. The media is then inserted into your camera and a series of steps are taken on the camera to complete the installation.

• WARNING!!: This utility is only for use with the Sony® DSC-H2 Cyber-shot® digital still camera. Do not install this utility with any other model of Cyber-shot camera.
• WARNING!!: This Digital Camera firmware update and any changes incurred by it are permanent. It is not possible to return to a previous firmware version after updating this firmware. By continuing this update process and downloading and updating this firmware, you acknowledge that you are aware and understand that this update cannot be reversed.
• This update process requires the following items for proper updating:
  • A computer with:
    • Available Hard Disk Space: 5 MB or more
    • Installed Memory: 32 MB or more
    • A USB port or a Memory Stick® DUO media slot
    • One of these operating systems installed:
      • Mac OS® X v10.3
      • Mac OS® 9.2
      • Mac OS® 9.1
  • Camera power supply:
    • Supplied Batteries or the AC-LS5K AC Adaptor (purchased separately) - Ensure the batteries are fully charged or the AC adaptor (not supplied) is plugged into a working outlet.
      WARNING!!: The camera may not operate properly if the power is interrupted during the update.
  • USB cable
    • Use only the USB cable supplied with the camera.
      WARNING!!: Update functionality is not guaranteed if you use any other USB cable.
  • Recording media
    • Sony Memory Stick Duo™ media
• Performing the firmware update will return all settings, except [Video Out] and [Language], to the default settings. To restore your personal settings, you will need to set them again.
• WARNING!!: The file number of the next image to be recorded will be reset to "DSC0001", regardless of the images previously recorded. If you have already recorded images with the camera, newly recorded images may have the same file numbers as images previously recorded. Take care to avoid file name conflicts and to avoid overwriting previously recorded images when transferring images to your computer.
• It is highly recommended to print out these instructions as a reference during the installation process.