1. Download the SRCDF_FX.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the SRCDF_FX.EXE file to begin the installation.
3. Click Finish.
4. At the "Installation is now complete." message, click OK.
5. After printing the ReadMe.txt file, click the X in the top-right corner to close the file and complete the update.

The installation of the Versatile SRCDFD program update is complete.

Uninstall Instructions

If it is necessary to install the HCF PCI Modem Drivers again, you will need to first remove the SRCDF_FX.EXE installation files. To do so, follow these steps:

1. Go to the directory where the SRCDF_FX.EXE file was downloaded and double-click it.
2. At the "SRCDF_FX - Welcome" box, click Continue.
3. At the "Setup" box, select "Remove" and then click Next.
4. At the "Confirm File Deletion" window, click OK to remove all of its components.
   NOTE: If a "ReadOnly File Detected" message box appears, click the box next to "Don't display this message again" to check it and then click Yes.
5. At the "Maintenance Complete" screen, click Finish.
6. At the Windows Desktop, right-click the My Computer icon.
7. From the menu, select Properties.
8. At the "System Properties" window, click the Hardware tab.
9. In the Hardware tab, click the Device Manager button.
10. At the "Device Manager" window, click the plus (+) next to the "Modems" category to expand it.
11. Under the "Modem" category, right-click the "Conexant HFC PCI Modem" entry.
12. From the menu, click Uninstall.
13. At the "Confirm Device Removal" box, click OK.
14. Click the X in the top-right corner to close the "Device Manager" window.
15. Click OK to close the "System Properties" box.
16. Restart the computer.
    1. Click Start and click Shut Down.
    2. At the "Shut Down Windows" box, select "Restart" and click OK.

After the computer restarts, the SRCDF_FX.EXE file can be reinstalled.

This utility resolves the "This Recovery CD is NOT for Your Computer" error message that appears when using the bootable floppy disk created with the Versatile SRCDFD program.

• This executable will install the Versatile SRCDFD program on the hard drive. The Versatile SRCDFD program may then be used to create an SRCD (System Recovery Compact Disk) startup floppy disk which is used to boot the system and enable DOS support setup of an external third party CDROM drive. Once the CDROM drive is setup, the System Recovery CD can be accessed.
• The ReadMe.txt file contains the instructions to use the Versatile SRCDFD program to create the SRCDFD startup floppy disk. This procedure can be done now or at a later time.
• USB CDROM drives, including the CRX 100EX USB CDRW drive, are not bootable. A system recovery or single file restore (SFR) cannot be performed using a USB CDROM drive.
• This update only affects the Versatile SRCDFD program on the hard drive. The Application CD will still contain the previous version.
• To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
• It is highly recommended to print out these instructions as a reference during the installation process.